Home internet service IPv6 traffic is all filtered even when using a Netgear LTE router. No port forwarding. Plz fix!
My background is in IT / networking and I started using Tmo Home Internet for the past 2 weeks. The router being shipped today to customers is missing very important features for power users - it actually broke my ability to remotely access my home via direct-connection using public IPv6 and IPv4 that I used on comcast. Contacting support for help is pretty much useless, although I have raised a few tickets regarding the major issues affecting me since switching ISPs, namely: Unable to ping my IPv6 WAN address given by T-mobile (to remotely monitor my internet connection) Unable to remotely access my home via my VPN server which listens to connections on the WAN IPv6 address (again, T-mobile is filtering ALL my incoming traffic - comcast, att fiber, other major players in the market don't do this filtering to endpoints except for spam port 25) Connecting to a VPN server hosted on the internet is unreliable and unstable. T-mobile does not offer IPv6 Prefix Delegation (comcast has it, att fiber does too) I've spent the majority of my time trying to figure out ways to make this work. Most folks out there are blaming the Nokia router firmware which is really locked down by T-mobile, so being the IT engineer I pretend to be I purchased a Netgear LAX20 which is T-mobile and AT&T certified - I swapped SIMs for my Home internet service and tested both. Even with a router that I fully control, with firewall disabled and allowing WAN icmp/ping responses T-mobile seems to continue to filter traffic (even pings!) incoming towards my service equipment…to make a fair comparison I got an AT&T SIM card and repeated the tests. On AT&T I can ping and access my device remotely when it is on the AT&T LTE network on the same Netgear LAX20. Decided to post here to vent and share some findings, as this is somewhat frustrating that other LTE carriers that do not offer 'home internet' service do allow you to control and manage your network as you see fit while the new "home internet" service does not give you any control at all. Those users who wish to be able to remotely manage their smart home should perhaps stay away for now until T-mobile decides to do the right thing which is for "home internet" service subscribers to have different security network rules than cellphones on the network. T-mobile please fix your business model for this new service, starting with adding the ability to request zero network filtering for home internet subscribers and the ability to get IPv6 prefix delegated.Plex Remote Access Unavailable.
I have the T-Mobile router connected to Google Wifi. Obviously double NAT. I get this in Plex settings: Not available outside your network Your server is signed in to Plex, but is not reachable from outside your network.Learn moreTip:It looks like your server may be connected to the internet through multiple routers or other network devices. Try connecting it directly to your primary device, or visit our support site for more information about troubleshooting this "Double-NAT" scenario. I know there is no bridge mode. I'm thinking some kind of port forward may work but that's not even available. Anyone found a way around this? Gotta have my Plex.
LAN and WIFI Bridged or not?
I installed the TMobile 5G home internet and it works pretty good. I'm in rural PA and only get poor reception for TMobile. Does anyone know if the LAN interface is bridged to the WIFI interface? It seems that my Wifi devices cannot see the devices on the LAN interface. There are literally no settings in the device that I can control. As soon as I got this thing I wanted to put it on a designated subnet but that seems impossible. Seems that 192.168.12.x is hardcoded. I got around the subnet issue but now I need to bridge the lan and wifi interfaces. It seems almost as if the wifi interfaces are firewalled against the the lan interfaces. Thanks, David
Does T-Mobile have any plans to expose advanced settings on their gateways?
Is anyone able to provide a timeline for T-Mobile providing access to advanced router settings? (You know, the ones virtually all other ISPs provide) Currently T-Mobile's home internet solution does not allow users to: Manage DNS settings Manage DHCP (IP addresses for client machines) Use any subnet other than 192.168.12.x connected directly to the gateway Put the gateway into bridge mode - this results in double network address translation (NAT) that breaks services like port forwarding and VPN Specify the channel to be used for wireless SSIDs (neither 2.4 nor 5Ghz) It would be really nice to know if T-Mobile has any intention of ever resolving these issues. Until they do, users will continue to be frustrated with just how inflexible and limiting the T-Mobile home internet solution actually is compared to other ISPs. When you factor in that most users get 150/30Mbpsas average bandwidth, T-Mobile's low cost is actually not that low - most ISPs will provide 400/35Mbps for just a few dollars more. So, when can we expect to get real access, on T-Mobile Home Internet, to the configuration options that almost all other ISPs provide already? It really is shameful that this hasn't been addressed or resolved already!
