User Profile
Xydz
Newbie Caller
Joined 6 months ago
User Widgets
Contribuciones
Re: T-Mobile Internet | Blink & SimplySafe Issue
Aari335 wrote: @MichaelGeorge@Symbal ****Code Cracked**** After reading your comments and following the recommended methods to get connected, I was unsuccessful. I created a separate network on the gateway that used 2.4 Ghz but was not able to connect. I thencalled blink customer service and explained the situation and was informed that my sync module FIRMWARE was out dated. In order to update it, you must unplug the sync module then insert a pen to hold the reset button down for 10-15 seconds but do not release it. Then you must plug the power source back in to the sync module while still holding the reset button until it blinks red. Once you release the button, wait for the blue light to start blinking.Now you will be able to connect your module to the network configured for the 2.4Ghz. This worked for me 100%. Good Luck! THANK YOU. It worked for me too!17Visto1like0ComentariosRe: T-Mobile Internet | Blink & SimplySafe Issue
@Aari335 THANK YOU! It worked!!! Trying out the TMobile Home Internet (white gateway device) and one critical need was for my blink cameras to get connected to the network however I was having issues. Spent an entire afternoon reading all the steps I can find and figuring them out. Made sure password was right. Created a network only for 2.4G, did not work. Added a Acer router and created a 2.4G just for the cameras, still did not work. Reset my sync module, however, it was still unsuccessful. Followed the steps provided by@Aari335on how to reset the module right and this time I got all my cameras working after that firmware update. Now I can shift my internet service provider to TMobile.8Visto0likes0Comentarios