User Profile
wolff
Newbie Caller
Joined 5 months ago
User Widgets
Contribuciones
Re: T-Mobile Internet | Blink & SimplySafe Issue
I wanted to update on this issue related to getting a blink sync module 1 to work on a new network. I spent hours trying to get this to work and following the instructions from above as well. From above: "Key notes are unplug the Blink Sync 2 modulewhile "keeping the reset button pressed in with a pin at the same time and while plugging it back in after waiting 10-15 seconds. Don't forget to keep the pin pressed in that reset buttonuntil you see the red light then let go and you will see a steady blue light for a few seconds… wait for the blue flashing lights to come on then hook up to the new network you added to your T Mobile box using the T-Mobile App, don't forget to select 2.4Hzand theWPA/WPA2 option. Thank you to all those that helped. See Aari's comment below" What ended up working for me was: unplug the module hold the reset button in for 5-10 seconds while it is unplugged Keep the reset button pressed down and plug in the module, a red light will come on for a minute Continue holding the reset button down until the red light flashes 3 times. I was originally releasing button when the red light came on right after plugging the module in and it would not connect. But if you wait, the initial red light will go out, and then the red light willcome on again and flash 3 times. Then you can release the button. After this the module connected, firmware updated, and it connected57Visto1like0Comentarios