Forum Discussion
Any Solution to the Printer connection problems with T-Mobile Gateways?
- Hace 3 años
Got my Brother MCF working finally. TM gateway app showed my printer in the devices tab, but other devices couldn't connect to it. Solución:
1 open gateway app and select network tab
2 tap + button lower right
3 create a new Ssid and password
4 set frequency band to 2.4 Ghz
5 set WPA Version to WPA/WPA2
6 set WPA Encryption to AES (TKIP & AES)
7 Tap SAVE
8 Reconfigure your printer wifi to connect to the new SSID you just created.
9 Once connected other devices should connect to the printer.
Note: Before creating the new SSID , I already had separate 2.4 and 5.0 networks set up with different SSIDs.
Kensxna wrote:Got my Brother MCF working finally. TM gateway app showed my printer in the devices tab, but other devices couldn't connect to it. Solución:
1 open gateway app and select network tab
2 tap + button lower right
3 create a new Ssid and password
4 set frequency band to 2.4 Ghz
5 set WPA Version to WPA/WPA2
6 set WPA Encryption to AES (TKIP & AES)
7 Tap SAVE
8 Reconfigure your printer wifi to connect to the new SSID you just created.
9 Once connected other devices should connect to the printer.
Note: Before creating the new SSID , I already had separate 2.4 and 5.0 networks set up with different SSIDs.
Thank you! I tried your steps and it worked for me. I connected my printer to the separate connection and now it's working.
Contenido relacionado
- Hace 5 meses
- Hace 8 meses
- Hace 8 meses
- Hace 2 años