Forum Discussion
Any Solution to the Printer connection problems with T-Mobile Gateways?
Installed my Arcadyan KYD21 Router last Friday, and everything works fine except that I cannot get my HP 8600 printer connected. Been through multiple conversations with support, and tried everything...
Got my Brother MCF working finally. TM gateway app showed my printer in the devices tab, but other devices couldn't connect to it. Solución:
1 open gateway app and select network tab
2 tap + button lower right
3 create a new Ssid and password
4 set frequency band to 2.4 Ghz
5 set WPA Version to WPA/WPA2
6 set WPA Encryption to AES (TKIP & AES)
7 Tap SAVE
8 Reconfigure your printer wifi to connect to the new SSID you just created.
9 Once connected other devices should connect to the printer.
Note: Before creating the new SSID , I already had separate 2.4 and 5.0 networks set up with different SSIDs.
What security settings do you have on the router? When I installed mine last week my laptop would bluescreen when I tried to connect it. I figured out that my Asus Nano USB that did NOT support WPA3, which is the default for the Arcadyan KVD21. I switched it to WPA/WPA2 and it worked fine.
It looks like your HP doesn’t support it either.
