Forum Discussion
assigning networks to ethernet ports
I have a wireless printer that has to connect via a WPS button (no apps available for this printer). I set up a 2.4 gHZ network on my t mobile modem, hooked a Ethernet cable into the back and ran it ...
Nathaniel.scott wrote:I have a cannon mg3222
There appears to be a way to connect your printer to your network without WPS.
The following link will give instructions on how to do it. As you go through the installation, step #10 will actually start the procedure of connecting your printer to your network. Be aware that an USB cable may be required.
https://support.usa.canon.com/kb/index?page=content&id=ART180653
If you have the CD-ROM that came with the printer, setup may be easier.
