Forum Discussion
Alfred Security Camera issue -- intermittent network connectivity loss
I installed my T-Mobile home internet router and system with two mesh extenders 4 days ago. I connected all of my Alfred security cameras to It. They have been successfully working for 4 days, until ...
I have stabilized the connection to the Alfred security cameras (both inside and outdoor cameras) by removing the mesh extenders from my TMO internet setup. I am now only using the gateway. One of the two mesh extenders in my setup up stopped working (it was defective). After that happened, the signal to the cameras improved dramatically, but their internet connections were still dropping on and off, just not as bad as before that mesh extender stopped working. As an experiment I unplugged the second mesh extender and the camera internet connections became completely stabile. I have one outdoor camera which is on the edge of the signal coverage for my home and it occasionally disconnects from the internet. I just reboot it and it usually reconnects.
@Hobbs1977, I came across the following post while looking for a solution. In short, many users who have cameras, thermostats and printers set up a separate SSID for those devices and set the security setting to the lowest setting (WPA/WPA2). Some users named their SSID something like "cameras" so that they don't mistakenly connect their phones and tablets to the wrong SSID.
Let us know what works.
---------------------------------------------
I had the same trouble trying to hook up devices when I first got it… Figured it out and I’m pretty happy with it… Couldn’t connect lPIXMA printer, or my Dyson air purifier… Then I figured out how to do it… I think the problem is with a 2.4 /5ghz and the WPA3 security seatings ..You need to go into the settings of the gateway, put to 2.4 ghz only , then put it to WPA/wpa2 at the easiest security( the first one ) ,… Try hooking everything up… when I did that everything hooked up… after it connected Then I switched it back to the more secure settings..auto 2.4/5ghz and WPA3 and everything stayed connected and it has worked great since .. no guarantees but you can maybe try that
