Forum Discussion
cannon mx922 wont connect to the gateway
Anyone have a solution to the " pres the was button" issue. I can get my printer to see the access point but it won't connect and I am never presented an option to enter my pw.
There is no WPS button on the T-Mobile Gateway, so you’ll need to enter the network password with the printer’s control panel.
If you haven’t already done so, create a second network, 2.4GHz with security reduced to WPA/WPA2.
Leave the default netwrok alone and ADD a second network with the + sign at the bottom of the Network tab in the T-Mobile Internet app. For this new network, set the band to 2.4 GHz y set the WPA version to WPA/WPA2. Try connecting your printer to this second network. Use the default network for your other devices, as much as possible.
Here are the T-Mobile support instructions for how to add the second network with the app.
Android How to create additional Wi-Fi networks | App T-Mobile Internet | Android | Asistencia de T-Mobile
iOS How to create additional Wi-Fi networks | App T-Mobile Internet | iOS | Asistencia de T-Mobile
You will need to do Standard setup (from the Canon manual)
