Disable wifi and NAT on the TMO-G4AR device and use my own router.
I want to use my own router that has WIFI and also control band locking on the WIFI. There 40 - 50 WIFI APs all around me and there is too much interference on T-Mobile's WIFI band selections. With my own router I can control the signal strength and exact frequency of my signals. I can also lock in the MAC Address to my devices. I also want to use my own NAT settings. With the G4AR, this would create a double NAT. I tried Hint Control and it is not designed for the G4AR. It messed up the settings and I had to do a manual reset. I do networking for a living for over 20 years. T-Mobile has everything locked up to theiradvantage and not for the better interest of their customers. I guess they want to make it dummy proof. But everybody is not a dummy. I tried the Cudy P5 5G gateway and the TMO sim will not work. You need to get a enterprise sim. Nothing else will work.NEW Arcadyan TMO-G4AR can't split bands
I am trying to lock my WiFioutput to only the 2.4 Ghz band and turn off the 5.0 Ghz band. I see where to select this in the App, where it gives three options: Automatic, 2.4 and 5.0. I select 2.4, it confirms my selection, and goes offline 90 seconds and says the change was successful. But when I look at my WiFi output, it still shows it as Automatic with both bands selected. It won't shut of the 5.0 band. Problem is, some of the devices on the far side of the house like ROKU which work on both bands will lock on to the 5.0 which barely has a signal and will ignore the stronger but slower 2.4 signal. I need to shut of the 5.0 signal completely so only the 2.4 signal will work, and this new gateway will not do that. My old Arcadyan gateway did this just fine. I even tried creating a second WiFi network, but that did the same thing.
