User Profile
3LCS3
Newbie Caller
Joined 9 months ago
User Widgets
Contribuciones
Re: I can't connect my printer to my network
I have a Surface Pro tablet running Windows 10 and an HP printer that would not connect to the network. After 45 minutes with T-Mobile tech service, no joy. I continued playing with the setup through the app on my phone (also T-Mobile) and set the WPA to WPA/WPA2 and like magic the printer and tablet connected. However, my phone disconnected from the network. When I tried to reconnect the phone, I received the message that policy requires a WPA3. I tried several work arounds to get a connection. Nothing worked and then the gateway shut down...no power, black. Unplugged it waited a few minutes plugged back in, tried different outlets, tested the outlet, uplugged, replugged...nothing. Called tech service, tried a couple things, nothing. New gateway ordered and on the way. I left the unit sitting on the table unplugged overnight. Got up the next morning and just for kicks plugged in the unit. It starts up and is working fine. I used the gateway setupsuggested by nc1037 and all is well. The printer and my tablet are happy on one network and my phone on the "factory" configured network. I speculate that the gateway shutdown when I tried to access it too many times after it was no longer programmed with WPA3 and that there is a timed reset.4Visto0likes0ComentariosRe: home internet
I'm in east central Florida. Fortunately 2 T-Mobile towers nearby. I just checked my speed...download202 Mbps. When I first set up the gateway I was lucky to get 30. Played with location and the direction of the gateway. I found that a couple of feet in location can make a huge difference as well as a few degrees of orientation.14Visto0likes0Comentarios