Forum Discussion
printer wont connect
5G gateway won`t connect to my Cannon 452 printer
This will work for any older 2.4GHz device. Worked for our cameras and lights and printers. In "Network" you can add another network by pressing the magenta +, give the new network a unique name, change the frequency to 2.4 only and the protocol to WPA2, leave the rest as is. Let the router update then search on your device for the new 2.4 network.
Furman wrote:5G gateway won`t connect to my Cannon 452 printer
Tu MX452 printer is probably not WiFi-6 compatible. It appears it needs 802.11b/g or n, and/or WPA2.
If you have the Nokia gateway, you can modify your settings to allow non-WiFi6 connectivity by trying one of the following:
- Activating and renaming the SSID of one of the 2.4GHz channels so that it is not name shared (basically allowing non-WiFi6 access)
- Lowering the 2.4GHz transmission mode to an older standard (example, ax/g to n/g)
- Lowering the encryption (WPA) to an older standard (example, WPA3 to WPA2)
