Forum Discussion
printer wont connect
5G gateway won`t connect to my Cannon 452 printer
This will work for any older 2.4GHz device. Worked for our cameras and lights and printers. In "Network" you can add another network by pressing the magenta +, give the new network a unique name, change the frequency to 2.4 only and the protocol to WPA2, leave the rest as is. Let the router update then search on your device for the new 2.4 network.
Toggle through your printer interface screen and see if there is a place to manually enter an "SSID" password (same as your 5G router password). I had to mess with my printer for almost an hour before figuring it out.
