I am unable to connect the 5Ghz WIFI band on my RT2600ac WiFi Router which is Wifi5 compatible. I contacted tech support at Synology re. this issue. he recommended I change the 802.11 mode from "ax" to "ac" for this to work. There does not appear to be a way to change this setting from the T Mobile Internet App. Form the internet, it appears other Wifi 6 compatible TMobile Gateways/Hotspots have the capability to change the "802.11 Mode". Is this possible with the TMO G4AR gateway?

@shorerider The TM Gateway and Synology wifi router both act as DHCP servers, so they both hand out IP addresses when devices connect to the wifi network. This is problematic and called "double-NAT." If I were you, I would do a few things:make sure the ethernet cable from the gateway is plugged into the blue WAN port on the wifi router put the wifi router into "bridge" mode (usually under network settings restart both and retestThen, your gateway will be the only one handing out IP addresses. Also, make sure you set up seperate SSIDs on gateway using the TM Internet app.Let us know how it work.

I think the tech support guy you spoke with isn't very good. I say this because "802.11ax" and "802.11ac" are hardware specifications that can't be changed with a setting. Both support both 2.4 GHz and 5 GHz bands. If you were using this router with your previous ISP, and if you can connect the router to the gateway with an Ethernet cable, that should be all you need to do. If you are trying to connect the router to the gateway via Wi-Fi, I think you need to configure the router as a Range Extender (but I am not certain.) It seems to me that if you connect via Wi-Fi to the default T-Mobile home internet network, which is both 2.4 GHz and 5 GHz networks, your router should broadcast both, but I don't know.I hope another helper will jump in here. Otherwise, you might need to call Synology again and hope for a different support person. EDITED TO ADD: It took me a long time to compose my reply, and then I saw @copz1998 had already replied. I'll leave mine here though, hoping it might be of some value.

Thanks copz1998 and nc1037: There some more information I need to provide. I am switching over from Startlink due to cost. The Synology router has been configured to run in Repeater mode while I have been on Starlink for 2 years and is configured like that as I switch to the Tmobile 5G GW. It has worked fine on StarLink which is Wifi5 I believe. In Repeater mode, the DHCP server along with a lot of features are disabled, i.e. the parent GW hands out IP addresses. The Wifi diversity and beamforming functionality still operate by default. Since the Tmobile 5G GW is on the second floor and my office space is on the first, there is no wired ethernet and I don't plan on any, so wireless is the only way to go. I forgot to mention that I split the Wifi bands on the TMobile 5G GW each with a unique SSID, so I could control the reconfig on the RT2600ac. So after a "reset to factory settings", I am able to configure the TMobile 5G GW 2.4Ghz band successfully, i.e. the RT2600ac searches for potential parents and displays a list from which I can see and select the TMobile GW 2.4GHz SSID. If I stop at this point and do not attempt to config the 5Ghz parent, every thing is copacetic. If however, I search for 5Ghz parents, the unique SSID I configured he TMobile 5G GW is not found. I even added the SSID as if it was hidden (an option of the RT2600ac) and it says "searching" and the whole RT2600ac becomes unresponsive, requiring a hard reset to factory defaults to start over again. I have been through this process about 8 or 9 times.

@shorerider thanks for teh update. Lets look at the issue from the metrics. Using your TM Internet app, go to the home screen > MORE (bottom) > Advanced Cellular metrics > 5G - what are your reading for RSRQ, RSRP, SINR, BandIf you have a weak 5G signal, that will be an issue. Also, on the TM home screen, what does your Signal quality show?It is a good idea to split the bands like you did, which helps to diagnose issues. You might want to delete your existing SSID and try just one with the Frequency Band left as "Automatic" and let the gateway steer the 2.4 and 5Ghz devices accordingly.

Cant connect to Synology RT2600ac | Comunidad de T-Mobile

copz1998
Connection Curator
Hace 8 meses
@shorerider The TM Gateway and Synology wifi router both act as DHCP servers, so they both hand out IP addresses when devices connect to the wifi network. This is problematic and called "double-NAT." If I were you, I would do a few things:
make sure the ethernet cable from the gateway is plugged into the blue WAN port on the wifi router

put the wifi router into “bridge” mode (usually under network settings

restart both and retest
Then, your gateway will be the only one handing out IP addresses. Also, make sure you set up seperate SSIDs on gateway using the TM Internet app.
Let us know how it work.
shorerider
Network Novice
Hace 8 meses
I am unable to connect the 5Ghz WIFI band on my RT2600ac WiFi Router which is Wifi5 compatible. I contacted tech support at Synology re. this issue. he recommended I change the 802.11 mode from "ax" to "ac" for this to work. There does not appear to be a way to change this setting from the T Mobile Internet App. Form the internet, it appears other Wifi 6 compatible TMobile Gateways/Hotspots have the capability to change the "802.11 Mode". Is this possible with the TMO G4AR gateway?

Forum Discussion

Cant connect to Synology RT2600ac

Contenido relacionado

Synology NAS connection

Connected, No Internet

Printer not Connecting to Wifi

Printer connection

dispositivos conectados

Discusiones recientes

Ethernet Port Not Working On Hub

Tower upgrades, but let’s make it take 2 years???

Etiquetas de devolución

Need 2 return labels sent to send both T-Mobile routers

Weak Wi-Fi Signal