Speedtests on Sagemcom using wired ethernet speeds are crippled
I just signed up 5 days ago and got the sagemcom gateway. Noticed I can get 350 Mbps using the sage's wifi but if i do the same speedtest a minute later using wired (ethernet) i get around 40 Mbps. This makes no sense as wired should always be faster and more reliable than any radio wave signal. I'm a network engineer and i can transfer 2 files between my 2 computers with the same cables and network adapters at 100 MB/s (1 Gbps) so i'm 100% sure it's an issue with the gateway Adding to that, if I repeat the same file transfer test when connected to wifi, the file transfer is done at 40-50 Mbps as well. I have my tplink mesh connected to one of the ports, so even if i use that signal to do a speed test (which is a wifi 5 mesh, meaning it's capped at 866 Mbps) i get much worse results. I have seen reported this issue many times over the unofficial tmobile isp reddit specifically when using the sagemcom https://www.reddit.com/r/tmobileisp/comments/ybm7yl/sagecom_to_router_speeds_my_wireless_router_speed/ I recorded a video with speedtests done with wifi and wired and got tforce to create ticket 72045919 . Looking forward to a resolution of this, I'm just hoping it's a bug that can be patched via firmware and not a hardware defect.
slow speed tests
Got a new gateway and a new sim card, then had sim card replaced. Speedtest at the TMobile store less than a mile away was over 170. My first speed test at home was over 100 but then every subsequent speed test ranged from 3 to 24. I've restarted the gateway and devices and still get slow speed tests. Without wifi speed test is almost 200, so service in the area is good. Did I get another bad gateway?AnyConnect VPN has become too slow as of Sep 2024
I use Tmobile 5G internet and my AnyConnect VPN speeds were adequate until Sep 2024! The VPN speeds are now at best about 4 mbits/sec for download and about 6 mbit/sec upload, which is way too slow. The nominal speed, without VPN, for myTmobile 5G internet, is more than 300 mbits/sec download speeds. What has changed and how do I resolve this?