User Profile
IraR
Newbie Caller
Joined 2 years ago
User Widgets
Contribuciones
Re: tmobile router
I found an answer that worked in another forum: Best answer by bocaboy2591 Your problem is pretty common among T-Mobile Internet users. This usually fixes the problem. Try adding a new WiFi network for the Canon(s). Use the T-Mobile app and tap the Network tab on the bottom, then the "+" button on the lower right. Create a new 2.4 GHz WiFi network with a unique name (SSID), just for your printer. Make sure the WPA type is WPA/WPA2. This is different from your main network which, by default, is WPA2/WPA3. Now, go to your printer and clear out all of the information you have entered for your printer's setup and then recreate your wireless connection to the new network you just created. I'll bet you'll be good to go. ¡Buena suerte!1Ver1like0ComentariosRe: tmobile router
Thanks for asking. I'm connected except for my printer, which will only connect to a 2.7G channel, whereas my new iphone is 5G. I'm trying to log in to the router so I can see if the D371 (model FAST 5688W) supports running both channels--my idea is to name the 5g "home router" and the 2.7g "printer" (and give the latter a different password). Then my laptop and phone connect tot he 5g and just this one older printer to the 2.7. I've tried doing this using the tmobile internet app but it only allows me to select one channel or the other.1Ver0likes0ComentariosRe: Canon printer will not connect to T-Mobile 5G Gateway home internet
I found some advice saying I should log into my router and create a separate SSID for the 2.4 ghz band and connect my printer to that. I used the tmobile internet app to log into my router but the only choices were either the 5ghz band or the 2.4 ghz band. I have a 5g phone so I can't just change my router to 2.4 ghz because then my phone won;t have a wifi connection. Does the D371 router allow you to broadcast two bands or offer some other way to log in and check advance settings? ¡Gracias!0Visto0likes0Comentarios