Forum Discussion
printer wont connect
5G gateway won`t connect to my Cannon 452 printer
This will work for any older 2.4GHz device. Worked for our cameras and lights and printers. In "Network" you can add another network by pressing the magenta +, give the new network a unique name, change the frequency to 2.4 only and the protocol to WPA2, leave the rest as is. Let the router update then search on your device for the new 2.4 network.
The Cannon 452 should work on a separate 2.4 GHz SSID. Either add an additional SSID on the 2.4 GHZ radio or separate the current one and change the name/SSID to reflect the difference.
Built-in wireless LAN (IEEE 802.11b/g/n)
If you don't like that solution or have issues with it add another router or an extender. The 803.11ax of these gateways doesn't play well with the older tech. Some might argue the older printers do not play nice with the newer 802.11ax. It is still the same problem. Compatibilidad
