SP Red Test Only

Again:

You might be able to turn that off IF you can see a reference to the SSID in the configuration. Go and check out Nater Tater’s YouTube video(s). He has a video about how to turn the SSIDs off in the Arcadyan router through a rather creative access. You would do the same for all three wifi frequencies, the 2.4 GHz & the two 5 GHz radios. 

Go watch the Nater Tater YouTube video. The one where he shows how to disable the SSID on each radio frequency. If you follow the directions he provides and get the config.txt file out you will probably see that SSID listed in the router config. If the configuration has that SSID in it, which it probably does, then you can change the value of the enable SSID to false vs true and turn it off as with any other SSID. The other option would be to edit the configuration file to remove the "Red Test Only" SSID and the associated parameters for it. 

All the commands are there to download the configuration file and how to edit it, and how to send the modified file back into the gateway. If you did make a mistake and the config did not work you could always reset it to factory default to recover. If the device is like the switches I have worked with over the years it will generate a factory default configuration file if it has only a corrupt configuration file. You might have to use the reset switch and process to reset it to factory default but that is not hard. 

Attached is a copy of the Arcadyan user guide. It has helpful information. 

If you don't feel comfortable using that process to try to have that disabled or gone then call support and work it out with customer support. Watching the video and following Nater Tater's guide will probably be faster and get the job done. Its your call my friend. It is an odd issue I agree but if there are no clients connected to the SSID then it will be doing nothing.