Forum Discussion
Random TV Buffering
- Hace 2 años
@coooldad, those numbers look pretty good to me! I'd be very happy if I could get that speed. My gateway connects, at best, at 60-70 Mbps, and usually only 35-40 Mbps. Nonetheless, I am still able to use 48 devices simultaneously, including streaming TV, computers, et al. My point is that speed is relative to what you're trying to do. If your devices are operating well and are accessing the Internet at the speeds you show above, you are doing very well.
You did exactly the right thing with the Orbi! While you are adding a hop from the gateway to the Orbi, it doesn't appear to have negatively affected your WiFi signal. Just make sure that the Orbi is in Access Point mode so that solo the T-Mobile gateway is managing DHCP.
As for WPA, that is really a factor of the client that is connecting. It's a security setting for the WiFi you are broadcasting in your home. It has nothing to do with the tower. Hence, WPA3 is more secure than WPA. Some older devices can't read WPA3, which is why you sometimes have to create a new network with only WPA/WPA2 and 2.4 GHz.
Hope this helps. Good luck, although it doesn't look like you need it!
@coooldad if you have a ping of 14 ms with downloads of over 100 Mbps, your buffering issue is not with your gateway. I would look at my smart TV and check the following:
- Is it hard wired with ethernet or wifi
- If hardwire try connecting to your gateway via wifi
- Make sure your TV is connecting to the correct wifi ID
- Try deleting all wifi options and then rescan for the T-mobile gateway
- In the past while trying to resolve network issues with my Samsung smart TV I unplugged the TV for a few minutes and restarted it to clear any old cache.
When you get the buffering, is it while streaming Netflix, Amazon Prime, etc.?
Are you only using the T-Mobile gateway or do you have a router attached?
I hope this helps!
Contenido relacionado
- Hace 11 meses
- Hace 3 años
- Hace 7 meses