Forum Discussion
Two weeks with our new Sagemcom Fast 5688W Gateway.
We started our Home Internet service with the Nokia round trash can (rightfully named). I had two of those. Both responded the same way. The Nokia gateway was fast but would lose its connection about...
Just in case you have a Windows 10 PC/Laptop and have not set the DNS static:
If you have a Windows 10 client and get to the Wireless Status dialog box then at the bottom select Propiedades then you will see the dialog box open that shows “Connect Using" and it should have the wireless adapter in the window. Below there is a set of various parameters in a listing and the title is, "The connection uses the following items.” From that listing you select, “Internet Control Protocol IPv4 (TCP/IPv4) y luego selecciona Propiedades. Of course this is a diaglog box which should have a radio button with a dark dot in the middle of Obtain IP address automatically. Below is the Obtain DNS options and then the selection of the radio for Use the following DNS server addresses and enter the DNS addresses. In effect a primary and a backup DNS server IP address. Back out after selecting OK after changes.
I went through the “Control Panel” vs the newer Window boxes but the end result is the same.
