Forum Discussion
Canon Printer/Scanner won't connect to 5G Gateway
I have a Canon MG-3022 printer/scanner. When I was on the trial period of getting the 5G gateway, I could connect the printer portion of my printer/scanner but the scanner would not connect. It's one...
Right, the trick is to have a second Wi-Fi network on your gateway. It should be 2.4 GHz with WPA/WPA2 security for the older devices. You probably still have this; perhaps your printer-scanner lost its connection.
Post again if you need more detailed help.
With my Maxify MB2120 I had to do two things: 1) In T-Mobile Internet I had to add a Network with only 2.4ghz and wpa2/3. 2) I had to move through the printer screens to manually enter the wireless lan name and password.
#2 was done by going through the following screens: LAN settings > Advanced setup > scroll through networks until you see "Directly enter the wireless setup name > then manually enter the network name of your newly made 2.4 network followed by manually entering that network's passcode. And then you should be in
