HP Printer Wireless Set up Issue

With my HP printer 5514, there are options for default settings y internet default setting. Probably need to reset the default internet settings (I suspect works like a "forget" network option). See the issue I solved, below.

My 5514 printer would actually connect to the T-Mobile Gateway network ok but still could not be seen by Windows 10/11 on any of my 3 computers. I was able to solve this issue by changing the IP address of the printer via the printer menu. On my HP printer menu, I selected the wireless icon, then internet settings, then IP setting, and there was able to change the IP address of the printer. After that, my printer became available to Windows 10/11 on all computers. Apparently, the old IP address was still associated with the previous network router from AT&T.

I also noticed that after I did this, if I would have gone one setting further than the IP setting, there was an option to install the default printer network settings (vs the default printer settings). I suspect this would have accomplished the same thing. Anyway, all is well now with my printer.