Mesh Wi-Fi 6 System

cseder wrote:

What does double NAT mean. Does it mean having two WIFI networks? Do they not make wireless nodes that will hookup to the gateway? I see Nokia has a WIFI Beacon 6 but it is not available yet.

So with networking, think of each router as a network (including the T-Mobile home gateway, because it's also a router). If you link a router behind another router, you're essentially putting a network behind another network. Each Network has their own address scheme and mapping (NAT), and each need settings on how they communicate between each other and the internet. This brings about different pros and cons.

I'm running a double NAT now, because i have an Asus Mesh (no other mesh is compatible, let alone T-mobile's "iffy" mesh, not sure about bridge-moding the main router and how it could affect the other nodes). So far, i don't have any loss of speed/performance, but sometimes my router connection does go down (over dhcp conflicts? my only big issue). IPv6 works fine once i set it through passthrough. In terms of port-forwarding, does the T-mo gateway NOT have a firewall? I get that most of the traffic they block is on their end, but so far nothing is blocked (i only need to forward on my Asus router, and everything goes through). Any tips or advice on settings/config to keep stability/security would be appreciated.