Windows not finding the printer
I have successfully connected my Brother printer to the internet through my T-Mobile box, but when I try to connect to it on any of my computers (two laptops and a desktop), none of them can find a printer. I dumbed the network down to 2.4 GHz, WPA/WPA/2, TKIP & AES and repeatedly rebooted everything without success. All are showing up as connected devices on the T-Mobile Internet app, but Windows is not finding the printer. I have tried connecting directly using the printer's IP address, but that doesn't work either. I talked with T-Mobile Home Internet Support, but after running through things the only suggestions were (1) to delete the printer's drivers, etc.,from the computer and go back through the printer installation (which I did, with no change) orto add a Mesh and try connecting through that. Any suggestion on getting Windows to see the printer that is on the network? I am about ready to jump back to ATT. Lousy customer service and slower speeds, but at least everything connected!
Printer shows OFFLINE and cannot print
Hello to all, I just configured my 5G gateway for internet, and also configured the printer to that gateway. It says connection successful. But unfortunately I cannot print. I go to my computer or to my laptop and they both say Printer Offline. I tried creating a second network with 2.4ghz but it didn't work. I tried restarting everything, removing the wifi settings and putting them again, but nothing works. What can I do? The printer is HP Officejet Pro 7740. ¡Gracias!
Printer Stopped Connecting to Wifi
Now, whenever I try to reconnect, it says that it failed the MAC address filtering check. My Gateway isArcadyan KVD21, which according to some other questions I've seen asked, doesn't have those kinds of access controls. I've got a 2.4g band set up which is what the printer needs, and confirmed that the printer supports the WPA3-SAE security type I've got set up. The frustrating part is that when I switched to T-Mobile back in November, the printer connected just fine. We don't use it super often, so it's not clear when this issue arose. The printer is an Epson ET-4800. Before I call up Epson support and have them tell me it's the fault of the gateway, is there anything else I should try?
