changing security protocol

NyRican56

You state, "hotspot" but that really does not reflect the actual appliance. If you are using the Nokia then it is easy. If you are using the Arcadyan gateway then watching Nater Tater's YouTube video on the subject of the Arcadyan "hack" is helpful. With the commands you can access the gateway, copy out the configuration file, edit the settings and then send the configuration back into the gateway. If you want to have WPA, WPA2, WPA3 you can allow one or all of them. You have to establish the authentication parameters for each frequency, the 2.4GHz, and the high and low 5GHz bands. Once you have your changes done and the config is sent back in it should be good to go. If you don't get it right no sweat just reset the gateway to defaults and do it again. If you see the video and take your time you can get it done. It takes a bit of focus and patience.