Forum Discussion
t-mobile access point (white disk)
I just upgraded to home internet plus, and when I go to try adding an access point it does show the option but it makes it so that I can’t click on it and set it up, help.
I had same issue where T-Life app won't allow me to "add new access point". It turns out you don't need to add it manually in the app. Here's what I did.
- Plug access point device to power and connect to modem using ethernet cable.
- The device will show a blinking white light, implying an internal firmware update. Wait for it to finish.
- wait until the access point device is showing a steady green light, which implies the pairing is complete.
- now you can move the access point device to any preferred location. And it should work after light turns green.
I was constantly getting the white light. I had another cat6 wire that ran to a network switch that was connected to the gateway while trying to get the mesh to work. As soon as I removed the cat6 wire I was able to get it to work.
