I have a Netgear Nighthawk EX7500 and can't get it to recognize the new internet gateway. Neither Netgear (3hours on the phone over 2 calls) or T-Mobile(2hours on the phone). The router/modem light on the extender doesn't light up so I can't do anything with it. Netgear wanted $149.95 to diagnose on the 1st phone call and $75 on the 2nd call….no friggin way...highway robbery!!!

I finally got my Netgear nighthawk mesh extender connected to T-Mobile internet but it took me hours. First of all it was impossible to connect with the Nighthawk app so I had to do it through the browser of my mobile phone. Unplug the extender and plug it in as close to your T-Mobile router as possible. (You can move your extender anywhere you want after you get it set up). Go to the WIFI settings on your mobile device and connect to the Netgear_Ext network. If you don't see the Netgear_Ext network you will need to do a hard reset on your extender. To do this hold the factory data reset button on your extender down for a full minute (you may have to hard reset it several times). Then go back to Wifi settings on your mobile device and the Netgear_Ext network should be visible. If it's still not visible then you need to call Netgear tech support and purchase a tech support plan for $50. If they can't get your extender setup they won't charge you the $50. When you're connected to Netgear_Ext open your browser and type in mywifiext.net or else use the IP Address of 192.168.1.250 instead whichever works for you. You will be prompted to click on Admin to either login or create an admin account. Your user ID will be "Admin" and you will create your password. Then follow the prompts and connect you extender to your WiFi network. If the box is checked that combines your 2.4 and 5G Networks you need to uncheck that box before continuing. It sounds like a lot but it can be done with a lot of patience and persistence.

RonDLS wrote: https://www.downloads.netgear.com/files/GDC/EX7500/EX7500_DoMore_EN.pdf Thank you, Ron, but believe me….none of this worked even after the 3 hours on the phone with Netgear. The 1st method says to connect to the extenders wifi SSID by using my phone, computer or iPad...nope….tried on all 3 and doesn't show up. The 2nd method says WPS button...none on our T-mobile gateway. The 3rd way is to log into their web, but the link never goes thru. I won't ever buy another Netgear product! Thank you for trying!!!

The Netgear number that I called was 855-432-7432. You have to contact Netgear tech support not T-Mobile. Netgear's representative was difficult to understand as well but I was patient and asked him to repeat things if necessary. He was knowledgeable and patient with me as well and we got it done. The key was the Hard (one minute) reset.

NerdHerdz just helped me connect 2 NetGear extenders to T-Mobile 5g router.2 AC1900 Model EX6400. He worked hard and spent lots of time fixing IP conflicts etc. I also bought the 2-year service and support because honestly, no one else was able to help me. Took a couple of hours but the dude was awesome, kind, and very informative. Here's the info. Internet for dummies (me). Thank you NerdHerdz!! https://nerdherdz.org/

Detoxx11 wrote: I finally got my Netgear nighthawk mesh extender connected to T-Mobile internet but it took me hours. First of all it was impossible to connect with the Nighthawk app so I had to do it through the browser of my mobile phone. Unplug the extender and plug it in as close to your T-Mobile router as possible. (You can move your extender anywhere you want after you get it set up). Go to the WIFI settings on your mobile device and connect to the Netgear_Ext network. If you don't see the Netgear_Ext network you will need to do a hard reset on your extender. To do this hold the factory data reset button on your extender down for a full minute (you may have to hard reset it several times). Then go back to Wifi settings on your mobile device and the Netgear_Ext network should be visible. If it's still not visible then you need to call Netgear tech support and purchase a tech support plan for $50. If they can't get your extender setup they won't charge you the $50. When you're connected to Netgear_Ext open your browser and type in mywifiext.net or else use the IP Address of 192.168.1.250 instead whichever works for you. You will be prompted to click on Admin to either login or create an admin account. Your user ID will be "Admin" and you will create your password. Then follow the prompts and connect you extender to your WiFi network. If the box is checked that combines your 2.4 and 5G Networks you need to uncheck that box before continuing. It sounds like a lot but it can be done with a lot of patience and persistence. 😁 👏 THIS WORKED!!!!! THANK YOU for sharing! 💪👊🙌👏No need to look further or waste any more time.

How do I connect a Netgear Nighthawk wifi range extender to the T-Mobile internet gateway

Westovers
Newbie Caller
Hace 2 años
tomwil wrote:

mehtaj01 wrote:

When we call, that call goes to Phillpine, those boys/ girls talk very sweet but they can't resolve problem. They promise that will call you back but they don't.

Why can't we call USA representative? I don't understand.

Appears cost cutting by T-Mobile. You can always pay 50% more at Verizon / AT&T if you want US representation.

Nope. No US rep at AT&T anymore either
trexbc
Roaming Rookie
Hace 2 años
I can connect the AX1800 range extender to the 2.4G connection to TMobile but it will not see the 5G connection. I've tried resetting the Netgear extender but it still doesn't see the 5G connection.
Detoxx11
Roaming Rookie
Hace 2 años
trexbc wrote:

I can connect the AX1800 range extender to the 2.4G connection to TMobile but it will not see the 5G connection. I've tried resetting the Netgear extender but it still doesn't see the 5G connection.

Was the box that combines the 2.4G and 5G (in the setup process) network's checked or unchecked? Make sure that it's unchecked. If you did everything else (including the hard one minute reset and still have no luck try it with a 5G compatible laptop instead of a mobile device (if possible). If still no luck all I can suggest would be to call Netgear Tech Support as there are fixes/suggestions that they can do for you from their end. Good luck my friend.
trexbc
Roaming Rookie
Hace 2 años
I tried it every which way. I split TMobile to two names. Then I set it back to one name with the Netgear box checked. Every time Netgear did not see the 5G network. It saw a lot of 5G routers of my neighbors but not TMobile even with the two boxes sitting right next to each other. I reset both devices and tried downgrading the firmware on Netgear. After hours chatting with Netgear they told me to return it for another extender. If I get another extender it will not be a Netgear.
Detoxx11
Roaming Rookie
Hace 2 años
You're most welcome my friend!
tijonetwork
Network Novice
Hace 12 meses
Steps to do that.
reset the wifi extender

once it’s done, connect an ethernet to the extender and on a laptop.

login into the extender by typing the ip 192.168.1.250

The username is admin, look in the back of the extender for the password.

Once logged in, your current wifi name will appear with EXT.

Enter the password

Voila, you are golden

Forum Discussion

How do I connect a Netgear Nighthawk wifi range extender to the T-Mobile internet gateway

Contenido relacionado

MESH Extender - Solid White Light

Connecting certain Netgear extenders to T-Mobile 5g Gateway

t-mobile access point (white disk)

Extended International Use

Simple Plug In Extender for 5G Gateway

Discusiones recientes

Old T-Mobile Internet App works, New T-Life app Doesn't

5G Internet Showing Incorrect Location

Custom DNS server

Delete Wi-Fi network on 5G Gateway

How to handle lack of WPS button on new Home Internet Router