Forum Discussion
T-Mobile Home Internet Plus TP-Link Deco Wifi 6 Mesh
I just bought a TP-Link Deco WIFI 6 mesh and it looks like the setting (Overview) page have a bug.
My General setup :
Router and Extender - 1st Floor
Router and Extender - 2nd floor - Connected to T-Mobile with Ethernet
As you can see here I have 10 devices connected to TP-Link via WiFi, but it shows connected Ethernet.
TP-Link is on AP config.
Can’t complain much as I get 500 Mbps d/l and 50 Mbps u/l. Real world steam download is 50 Mbps d/l.
I don’t believe this is a bug.
The T-Mobile gateway is showing the 10 devices as ethernet becuase it sees them coming through the ethernet port on which your TP-Link is connected.
It looks like you have 3 devices using the gateway WiFi. You may want to consider disabling WiFi on the gateway and having all wireless devices use the TP-Link as people have reported that this can help reduce the number of gateway disconnects that some are experiencing. But if you have not been experiencing any disconnects - then maybe all is well as it is.
What version of Deco? I'm using x20. Didn't like my setup. Ethernet cable plugged in both DecoX20 directly to T-Mobile Gateway.
I am having the same problem. Eternet cable plugged in both Deco x20 and T-Mobile gateway. I am getting can't find deco in the deco setup app. It says the deco is connected in the devices in the T-Mobile app. What am I doing wrong?
