HP Printer Wireless Set up Issue

Hi unclejoe00, I am not sure what OS you are running but I would check the firewall settings. It may be a firewall setting. I found the information below from a quick search on the printer. If you can disable the firewall as a test that is the first test I would make. If you remove it from the USB and have the printer showing it is connected to the WIFI LAN confirm what the printer IP address is and see if you can ping the printer. If you can then I would go to the firewall settings on the client right off and confirm those.

"The following ports are also used by your HP product and might need to be opened on your firewall configuration. Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the HP product."

Per HP Information: http://h10032.www1.hp.com/ctg/Manual/c01516369.pdf

• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

The ports are used for the following functions:

Impresión
• UDP ports: 427, 137, 161
• TCP port: 9100

Photo card upload
• UDP ports: 137, 138, 427
• TCP port: 139

Escaneo
• UDP port: 427
• TCP ports: 9220, 9500

Product status
UDP port: 161

Faxing
• UDP port: 427
• TCP port: 9220

Product installation
UDP port: 427