Forum Discussion

79AG's avatar
79AG
Roaming Rookie
Hace 3 años

Arcadyn IP Address

Is there a way to change the Arcadyan IP address?
iTinkeralot's avatar
iTinkeralot
Bandwidth Buff
Hace 3 años

So, are you saying you are intending to use your prior router with the T-Mobile Arcadyan gateway? Some users do but if you establish a double NAT solution you can encounter issues. 

You can put a third party router into AP mode and make sure its DHCP server is disabled. Then you would use the DHCP server of the Arcadyan gateway. Using another router with the T-Mobile GW will take a bit more effort. If you plan to use the WIFI from another router then you would need to go through the process to disable the radios on the Arcadyan. The best course of action then is to go watch Nater Tater's YouTube videos and gather more information. Others on the T-Mobile Community have used their routers or mesh solutions with the T-Mobile gateways you just have to work through the process. Those who have gone down that path have first hand info on how it worked for them and can make suggestions. 

You cant run a different subnet on the Arcadyan default subnet and expect it to work as you can't change the 192.168.12.0/24 subnet in that layer 2 broadcast domain and the 192.168.12.1 gateway address is set. If you are not real familiar with networking then you are going to have to do a bit of reading and research to make things work. 

If you want to make it more simple then you can migrate the clients to the 192.168.12.0/24 subnet and leverage the Arcadyan DHCP scope for clients to get their IP on the LAN. If you have clients on an Ethernet switch that is simple just connect the Ethernet switch to the Arcadyan and then have the clients release and renew IP addresses from the Arcadyan DHCP server. Of course you would have to get wireless clients authenticated to the WIFI of the Arcadyan OR if you use the third party router in bridge mode or AP mode then the clients can stay on the wireless radios of that router but get their new IP addressing from the Arcadyan. 

You can go down the path to use the Arcadyan with the wifi radios disabled and add the third party router just know it will take a bit of time and effort to make things work.